![]()
Home
About
keyboard_arrow_right Washing Fastness Tester
keyboard_arrow_right Crockmeter (Manual) keyboard_arrow_right Crockmeter (Motorised) keyboard_arrow_right Light Fastness Tester
keyboard_arrow_right Muffle Furnace
keyboard_arrow_right Twist Tester keyboard_arrow_right Fully Automatic Twist Tester keyboard_arrow_right Lea Strength Tester keyboard_arrow_right Yarn Appearance Board Winder
keyboard_arrow_right HTHP Beaker Dyeing Machine
keyboard_arrow_right IR Beaker Dyeing Machine keyboard_arrow_right Hot Plate with Magnetic Stirrer keyboard_arrow_right Water Bath keyboard_arrow_right Hot Air Oven keyboard_arrow_right Color Matching Cabinet
keyboard_arrow_right Round Cutter for GSM
keyboard_arrow_right Pilling Tester keyboard_arrow_right Random Tumble Pilling Tester keyboard_arrow_right Tensile Strength Tester keyboard_arrow_right Crease Recovery Tester keyboard_arrow_right Button Snap Pull Tester keyboard_arrow_right Bursting Strength Tester keyboard_arrow_right GSM Scale / Acrylic Cover keyboard_arrow_right Fabric Thickness Gauge keyboard_arrow_right Vertical Flammability Tester keyboard_arrow_right Spray Tester for Fabrics ![]() Textile Testing Equipments » Color Fastness Instruments » Crockmeter (Manual)
Crockmeter (Manual)![]() The ‘INNOLAB’ Crockmeter consists of a rigid flat metalic platform on which the test specimen can be held firmly and a abrading finger which rubs against it under a specified load. The platform is fixed over the base of the equipment and lies in a horizontal plane. The test specimen is held firmly over an abrasive paper which is pasted on the upper face of the platform, with the help of two pins holding it at both ends. The abrading finger has a flat circular rubbing face which is covered with 4 piece of white abradant fabric during the test. The abradant fabrics picks up colour lost by the test specimen during rubbing. It is held over the finger with the help of a tapered ring. Motion to the finger is given through a reciprocating arm with runs an two ball bearings to minimize friction and to apply a uniform load on the finger. The arm is moved by a manually operated crank and connecting link. The equipment is finished in dark metallic paint and bright chrome plating to give it a corrosion resistant finish. TECHNICAL DATA :
RELATED STANDARDS :
© Copyright 2018. Innolab India, Delhi, India |